Recherchez par référence, série, matériau, application ou spécification.
Appuyez sur Entrée pour voir tous les résultats Échap pour fermer
B 6 / D 14GE6C est une rotule à billes métrique compacte (largeur standard) avec un alésage (B) de 6 mm et un diamètre extérieur (D) de 14 mm. Largeur (W) = 6 mm, largeur de bague intérieure (T) = 4 mm. Poids approximatif : 0.005 lb.
Classée pour une charge radiale statique de 9 kN avec un angle de désalignement de ±13.0°. La bille en acier à roulement 52100 est rectifiée de précision, traitée thermiquement et chromée dur. La bague en acier au carbone est revêtue de PTFE pour un fonctionnement autolubrifié sans entretien, avec zinguage en option pour une résistance accrue à la corrosion. Adaptée aux amortisseurs, liaisons de suspension, tringleries industrielles et ensembles de pivots compacts nécessitant une rotule à billes métrique autolubrifiée.
Option bague zinguée disponible sur demande. L’équivalent métrique série large est GEG (GEGC) series. L’équivalent en pouces à bague fracturée est la série GEZ.
All available sizes in the GEC Metric Carbon Steel Spherical Bearings series. Can’t find your size? Contact us for custom dimensions.
| GEC PART NO. | B DIA. +0.065 -0.012 | D DIA. +0.38 -0.38 | W WIDTH +0.12 -0.12 | T WIDTH +0.12 -0.12 | O FLAT DIA. REF. | a° MIS. ANGLE REF. | STATIC RADIAL LOAD (kN) | APPROX WEIGHT (LBS) |
|---|---|---|---|---|---|---|---|---|
| GE4C | 4 | 12 | 5 | 3 | 0.3 | 16.0 | 5 | 0.003 |
| GE5C | 5 | 14 | 6 | 4 | 0.3 | 13.0 | 9 | 0.004 |
| GE6C | 6 | 14 | 6 | 4 | 0.3 | 13.0 | 9 | 0.005 |
| GE8C | 8 | 16 | 8 | 5 | 0.3 | 15.0 | 14 | 0.008 |
| GE10C | 10 | 19 | 9 | 6 | 0.3 | 12.0 | 21 | 0.011 |
| GE12C | 12 | 22 | 10 | 7 | 0.3 | 11.0 | 28 | 0.015 |
| GE15C | 15 | 26 | 12 | 9 | 0.3 | 8.0 | 45 | 0.027 |
| GE17C | 17 | 30 | 14 | 10 | 0.3 | 10.0 | 56 | 0.041 |
| GE20C | 20 | 35 | 16 | 12 | 0.3 | 9.0 | 78 | 0.066 |
| GE25C | 25 | 42 | 20 | 16 | 0.6 | 7.0 | 127 | 0.119 |
| GE30C | 30 | 47 | 22 | 18 | 0.6 | 6.0 | 166 | 0.163 |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
The GE6C is a compact metric self-lubricating spherical bearing with a 6 mm bore, sized for shock absorbers, suspension links, industrial linkages, and compact pivot assemblies that need low-maintenance articulation.
Bore (B) is 6 mm, outer diameter (D) is 14 mm, overall width (W) is 6 mm, and inner race width (T) is 4 mm, with an approximate weight of 0.005 lb.
The GE6C is rated at 9 kN static radial load with up to ±13.0° of angular misalignment — check both figures against your housing bore, shaft geometry, and expected duty load before specifying it.
The carbon steel race carries a PTFE liner, so the 52100 bearing steel ball — precision ground, heat treated, and hard chrome plated — articulates against a low-friction PTFE surface instead of requiring grease, which is what makes the GE6C maintenance-free in service compared with a plain metal-to-metal race.
Yes. Zinc plating on the carbon steel race is available as an option on request for additional corrosion resistance beyond the standard PTFE-lined finish.
GE6C belongs to the GEC standard-width metric series. The GEG (GEGC) series is the wide-series metric equivalent, and the GEZ series is the inch-size fractured-race equivalent — choose based on your width requirement and bore unit system.
