LCR-329 Bielle de tringlerie 6.00 in, filetage 1/2-20, filetages de goujon de rotule 1/2-20, bague en PTFE

The LCR-329 is a 6.00 in nominal-length connecting rod for adjustable mechanical linkages, control rods, and motion-transfer assemblies, with a 1/2-20 thread on the connecting body and a 1/2-20 threaded rod-end stud fitted with a PTFE-race spherical bearing at each end, so installed length can be fine-tuned and each end can articulate.

The LCR-329 has an overall L1 adjustment range of 5.75–6.25 in, with an L2 reference length of 3.000 in and an L3 typical dimension of 1.250 in, giving roughly 0.5 in of total length adjustment through the 1/2-20 threaded ends.

Each end of the LCR-329 terminates in a 1/2-20 threaded rod-end stud fitted with a PTFE-race spherical rod-end bearing, so the rod both threads for length adjustment and articulates at each pivot point.

Standard construction is carbon steel. Chromoly steel is also offered, with aluminum alloy and stainless steel available as optional materials — confirm the material, finish, and thread hand with SYZ before ordering.

The LCR-329 is built with a single 1/2-20 thread rather than a right-hand/left-hand pair, so length is set by thread engagement depth at one specification rather than by rotating a center body turnbuckle-style as on the 3/8-24 RH/LH rods in this category — confirm engagement depth with SYZ before ordering.

Yes. SYZ can adjust the nominal length, thread size/hand, end style, and material for OEM or custom linkage projects — provide your target L1 range and mounting thread when requesting a quote for the LCR-329.