Recherchez par référence, série, matériau, application ou spécification.
Appuyez sur Entrée pour voir tous les résultats Échap pour fermer
Bore 0.4375 / 7/16-20 ThreadPCYMR7T / PCYML7T présente un alésage (B) de 0.4375″ et un diamètre de corps (D) de 1.312″. La longueur hors tout du corps (AM) est de 2.438″, l’engagement de filetage (CM) est de 1.500″. Width (W) is 1.000″. Poids approximatif : 0.220 lbs.
Classée pour une charge radiale statique de 14,449 lb avec un angle de désalignement ultra-élevé de ±58°, cette rotule mâle en 2 pièces avec un filetage extérieur 7/16-20 UNF 3A convient aux liaisons aérospatiales, aux systèmes de direction et aux mécanismes de commande industrielle à cycles élevés. La plage de désalignement extra-large est obtenue grâce à une bille spéciale en acier à roulement 52100 pour désalignement élevé, rectifiée de précision et chromée dur.
La bague PTFE est standard sur tous les modèles PCYM-T / PCYF-T, offrant un fonctionnement sans entretien et sans lubrification dès la première installation. Configuration à pivot disponible (ajouter le suffixe S). Le corps est en acier chromoly 4130, traité thermiquement et revêtu d’oxyde noir ; la bille est en acier à roulement 52100, chromée dur.
All available sizes in the PCYM-T PCYF-T Metric Rotules à grand désalignement series. Can’t find your size? Contact us for custom dimensions.
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B DIA. +.0025 -.0005 | D DIA. +.010 -.010 | W WIDTH +.005 -.005 | T WIDTH +.005 -.005 | AM LENGTH +.015 -.015 | N THREAD UNF 3A | CM LENGTH +.062 -.031 | a° MIS. ANGLE REF. | STATIC RADIAL LOAD (LBS) | APPROX WEIGHT (LBS) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PCYMR6T | PCYML6T | 0.3750 | 1.125 | 0.875 | 0.390 | 2.125 | 3/8-24 | 1.375 | 46 | 11,050 | 0.14 |
| PCYMR7T | PCYML7T | 0.4375 | 1.312 | 1.000 | - | 2.438 | 7/16-20 | 1.500 | 58 | 14,449 | 0.22 |
| PCYMR8T | PCYML8T | 0.5000 | 1.500 | 1.250 | 0.470 | 2.625 | 1/2-20 | 1.625 | 60 | 16,240 | 0.33 |
| PCYMR8-10T | PCYML8-10T | 0.5000 | 1.750 | 1.250 | - | 2.875 | 5/8-18 | 1.750 | 65 | 24,158 | 0.44 |
| PCYMR10T | PCYML10T | 0.6250 | 1.750 | 1.375 | 0.531 | 2.875 | 5/8-18 | 1.750 | 48 | 21,219 | 0.51 |
| PCYMR10-12T | PCYML10-12T | 0.6250 | 2.000 | 1.375 | - | 3.375 | 3/4-16 | 2.000 | 64 | 30,290 | 0.68 |
| PCYMR12T | PCYML12T | 0.7500 | 2.000 | 1.500 | 0.651 | 3.375 | 3/4-16 | 2.000 | 54 | 29,127 | 0.79 |
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B | D | W | T | AF | N | CF | a° | STATIC | LBS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PCYFR6T | PCYFL6T | 0.3750 | 1.125 | 0.875 | 0.390 | 2.125 | 3/8-24 | 1.062 | 46 | 11,050 | 0.20 |
| PCYFR8T | PCYFL8T | 0.5000 | 1.500 | 1.250 | 0.470 | 2.625 | 1/2-20 | 1.375 | 60 | 16,240 | 0.43 |
| PCYFR10T | PCYFL10T | 0.6250 | 1.750 | 1.375 | 0.531 | 2.875 | 5/8-18 | 1.562 | 48 | 21,219 | 0.57 |
| PCYFR12T | PCYFL12T | 0.7500 | 2.000 | 1.500 | 0.651 | 3.375 | 3/4-16 | 1.785 | 54 | 29,127 | 0.84 |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
The PCYMR7T / PCYML7T is a 2-piece male rod end with a 0.4375" bore and 7/16-20 external thread, built for aerospace linkages, steering systems, and high-cycle industrial control mechanisms.
Bore (B) is 0.4375", overall body length is 2.438", thread engagement is 1.500", width (W) is 1.000", and approximate weight is 0.220 lbs.
The PCYMR7T / PCYML7T is rated at 14,449 lb static radial load with an ultra-high misalignment angle of up to ±58° — well beyond a standard rod end's typical range.
The extra-wide misalignment range on the PCYMR7T / PCYML7T is achieved through a special high-misalignment 52100 bearing steel ball, precision ground and hard chrome plated, paired with a PTFE-lined race — this geometry lets the ball rock through a much larger angle than a standard-clearance rod end before the body contacts the shank.
The body is 4130 chromoly steel, heat treated and black oxide coated, with a PTFE-lined race for maintenance-free, lubrication-free operation. The ball is 52100 bearing steel, precision ground, heat treated, and hard chrome plated in the special high-misalignment geometry.
PCYMR7T is the right-hand thread version and PCYML7T is the left-hand thread version of the same male rod end — same size, materials, and rating, just opposite thread hand.
